Anodized Business Card - Stucki Dither
Image
OMTech 80W Fiber MOPA · 160mm
Speed2000 mm/s
Power25%
Frequency60 kHz
Interval0.025 mm
Did these settings work for you?
Notes
Source: LightBurn Forum, 2024. 80W JPT MOPA Fiber, 160mm lens (110x110 work area). Works on any 80W JPT MOPA (OMTech, Monport, etc). Starting point only — test on scrap first.
View Full Settings (12 parameters)
Cut Settings Editor — LightBurn
00
NameC00Output
Speed2000.0mm/sec
Frequency60.00kHz
Max Power25.00%
Global Passes1
ModeImage ▾
Min PowerDefault%
Max Power 2Default%
Bi-directionalNegative Image
Line Interval (mm)0.0250
DPI500
Scan Angle (deg)0
PPIDefault
Dither Modestucki
Auto-RotateFlood Fill
Wobble
DefaultStep
DefaultSize
Fill all shapes at onceFill groups togetherFill shapes individually
Enable dot-width adjust
Dot Width:Default
Ramp LengthDefault
Ramp Outer Edge← scroll to see full settings →
New