Teal
Fill
OMTech 20W Fiber MOPA · 110mm
Speed1000 mm/s
Power30%
Frequency140 kHz
Interval0.001 mm
Did these settings work for you?
Notes
Source: Hoffman Engineering blog, 2024. OMTech Compact 20W MOPA Fiber, 110mm lens. Starting point only — test on scrap first.
View Full Settings (12 parameters)
Cut Settings Editor — LightBurn
00
NameC00Output
Speed1000.0mm/sec
Frequency140.00kHz
Max Power30.00%
Global Passes1
ModeFill ▾
Min PowerDefault%
Max Power 220.00%
Bi-directional fillCross-Hatch
Line Interval (mm)0.0010
Lines per Inch25400.000
Scan Angle (deg)0
Number of Passes1
Angle IncrementDefault
Auto-RotateFlood Fill
Wobble
DefaultStep
DefaultSize
Fill all shapes at onceFill groups togetherFill shapes individually
Enable dot-width adjust
Dot Width:Default
Ramp LengthDefault
Ramp Outer Edge← scroll to see full settings →
New