Engrave
Image
OMTech 20W Fiber MOPA · 110mm
Speed1000 mm/s
Power30%
Frequency30 kHz
Interval0.04 mm
Did these settings work for you?
Notes
Source: Hoffman Engineering blog, 2024. OMTech Compact 20W MOPA Fiber, 110mm lens. Starting point only — test on scrap first.
View Full Settings (24 parameters)
Cut Settings Editor — LightBurn
00
NameC00Output
Sub-Layer NameOutput Sub-Layer
Speed1000.0mm/sec
Frequency30.00kHz
Max Power30.00%
Global Passes1
ModeImage ▾
Min PowerDefault%
Max Power 220.00%
Bi-directionalNegative Image
Line Interval (mm)0.0400
DPI635
Scan Angle (deg)0
PPIDefault
Dither Modejarvis
Auto-RotateFlood Fill
Wobble
DefaultStep
DefaultSize
Fill all shapes at onceFill groups togetherFill shapes individually
Enable dot-width adjust
Dot Width:Default
Ramp LengthDefault
Ramp Outer Edge← scroll to see full settings →
New